Wirenet Image Band
wirenet.org mobile image band
Online Store Contact Us

View Cart
My Cart

There is 0 item(s) in your cart.
Sub-total
0.00
Technical Papers
Show per page
View As
Results 601 to 700 of 1158.
Ironing with superimposed force

Ironing with superimposed force

Ironing is a procedure that has been studied less frequently than extrusion, despite its numerous advantages. However, it has the disadvantage of small deformation which can be increased in thick-walmore»

$0.00 - Tech. Paper #P04708 (Member Price) $15.00 - Tech. Paper #P04708 (List Price)

No reviews
Johnson Steel & Wire Company, Worcester Wire Company, C.O. Johnson and Sons

Johnson Steel & Wire Company, Worcester Wire Company, C.O. Johnson and Sons

Washburn & Moen Mfg. Co., Spencer Wire Co., American Steel & Wire Co., Worcester Wire Co., National-Standard Co., Johnson Steel & Wire Co., C.O. *Johnson and Sons Pittsburgh Steel Co. The sixth articmore»

$15.00 - Tech. Paper #P00995 (List Price) $0.00 - Tech. Paper #P00995 (Member Price)

No reviews
KSM case study

KSM case study

This study compares the process stability in an old extrusion line before and after some of the extruders were replaced with new ones. It concentrates on savings in material due to better process stmore»

$15.00 - Tech. Paper #P04902 (List Price) $0.00 - Tech. Paper #P04902 (Member Price)

No reviews
Laboratory methods for assessing the drawability of mild steel wire rod

Laboratory methods for assessing the drawability of mild steel wire rod

Laboratory tests for study of the wiredrawing behavior of low carbon steel are presented; the tests simulate actual drawing conditions. Work hardening graphs, influence of the hardness of the wire romore»

$15.00 - Tech. Paper #P03266 (List Price) $0.00 - Tech. Paper #P03266 (Member Price)

No reviews
Laboratory performance of Super T electrical conductor alloy.

Laboratory performance of Super T electrical conductor alloy.

The properties of the aluminum alloy electrical conductor Super T are described, as are mechanical tests carried out to evaluate its potential long-term service performance. The applications of Supermore»

$15.00 - Tech. Paper #P02552 (List Price) $0.00 - Tech. Paper #P02552 (Member Price)

No reviews
LAN level 5 and 6 cable production actual technology and existing machinery upgrade possibilities

LAN level 5 and 6 cable production actual technology and existing machinery upgrade possibilities

Extrucell PE or PP foaming method, using injected nitrogen gas, has recently been developed for high speed telephone wire insulation lines. The same technology is used for production of LAN cables upmore»

$15.00 - Tech. Paper #P04336 (List Price) $0.00 - Tech. Paper #P04336 (Member Price)

No reviews
Large size double-twist stranders for MV cables of up to 61 wires

Large size double-twist stranders for MV cables of up to 61 wires

The recent introduction of a double-twist strander with a 2500-mm reel for the manufacturing of 61-wire conductors with a large cross-section for medium voltage pushes the use of this alternative tecmore»

$15.00 - Tech. Paper #P05246 (List Price) $0.00 - Tech. Paper #P05246 (Member Price)

No reviews
Laser diffraction sensors for diameter measurements. Latest developments for very small wire.  Future developments

Laser diffraction sensors for diameter measurements. Latest developments for very small wire. Future developments

The first sensors were developed between 1987 and 1988 to provide diameter measurement means working on-line for the steel cord industry. Recently CERSA has extended the range of measurement of thesemore»

$0.00 - Tech. Paper #P03911 (Member Price)

No reviews
Latest developments in cable design technology

Latest developments in cable design technology

Innovation in cable design technology has been driven recently by several factors, but the main influence is the demands from the cable manufacturer's customers. The key factor is the ability of the more»

$15.00 - Tech. Paper #P05485 (List Price) $0.00 - Tech. Paper #P05485 (Member Price)

No reviews
Latest measuring and control technology for high-voltage cable production

Latest measuring and control technology for high-voltage cable production

The capability to produce long cable lengths is one of the challenges manufacturers of high voltage cables face. This goes closely together with the cleanliness of the material. It has to be on the hmore»

$15.00 - Tech. Paper #P05484 (List Price) $0.00 - Tech. Paper #P05484 (Member Price)

No reviews
Latest technology for optical fibre coating and identification

Latest technology for optical fibre coating and identification

Cloud computing means that the individual computers on your desk, in your house or company will not exist any more. There will be just terminals which are connected to big metropolitan or national "Imore»

$15.00 - Tech. Paper #P05489 (List Price) $0.00 - Tech. Paper #P05489 (Member Price)

No reviews
Lead annealing and galvanizing of steel wire

Lead annealing and galvanizing of steel wire

A continuous lead heat-treatment and hot galvanizing process is described, including a 36 wire heavy hot galvanizing unit. The effect of heat treatment variables, pickling process, prefluxing processmore»

$15.00 - Tech. Paper #P02104 (List Price) $0.00 - Tech. Paper #P02104 (Member Price)

No reviews
Lead patenting of high carbon steel rod and wire

Lead patenting of high carbon steel rod and wire

The constant strength method of lead patenting high carbon steel rod and wire is described. The method patents all rod and wire, regardless of size, to the same strength; the patented microstructure more»

$15.00 - Tech. Paper #P01662 (List Price) $0.00 - Tech. Paper #P01662 (Member Price)

No reviews
Leonardo Power Quality Initiative (LPQI) and Leonardo Energy as applied to Turkey

Leonardo Power Quality Initiative (LPQI) and Leonardo Energy as applied to Turkey

The Leonardo Power Quality Initiative (LPQI) is an international educational program regarding power quality (PQ) that aims to provide end-users and business decision makers with facts and best practmore»

$15.00 - Tech. Paper #P05375 (List Price) $0.00 - Tech. Paper #P05375 (Member Price)

No reviews
Leoni Histral® - The cadmium-free alternative for cable manufacturers

Leoni Histral® - The cadmium-free alternative for cable manufacturers

Leoni Histral® has been developed as a cadmium-free copper-based alloy that is free of hazardous substances. It is designed to be useful for companies dealing with EU directives restricting the use omore»

$15.00 - Tech. Paper #P05275 (List Price) $0.00 - Tech. Paper #P05275 (Member Price)

No reviews
Life prediction for an optical fiber cable

Life prediction for an optical fiber cable

One common question asked about products in general is: How long will the product last? Certainly, this is a difficult question to answer. However, there are mechanisms to predict the product’s life more»

$15.00 - Tech. Paper #P05430 (List Price) $0.00 - Tech. Paper #P05430 (Member Price)

No reviews
Liquid antioxidants: a new choice for increased cleanliness and productivity in the production of X-linked cable insulation

Liquid antioxidants: a new choice for increased cleanliness and productivity in the production of X-linked cable insulation

Cleanliness of the insulating material is among the most important quality criteria in the production of XLPE insulated cables. The incorporation of additives is one possible source of contaminants imore»

$15.00 - Tech. Paper #P04860 (List Price) $0.00 - Tech. Paper #P04860 (Member Price)

No reviews
Liquid Quenchant Fluidized Bed Technology in the manufacture of steel tire cord

Liquid Quenchant Fluidized Bed Technology in the manufacture of steel tire cord

The newly developed quenching and soaking technique, Liquid Quenchant Fluidized Bed Technology, overcomes diameter and chemistry concurrency limitations of conventional heat treating processes while more»

$15.00 - Tech. Paper #P05186 (List Price) $0.00 - Tech. Paper #P05186 (Member Price)

No reviews
Longitudinal residual stresses of high-carbon steel wires drawn in sigmoidal, convex, concave, and conical dies

Longitudinal residual stresses of high-carbon steel wires drawn in sigmoidal, convex, concave, and conical dies

This paper shows the influence of the approach zone and bearing part of a die on the longitudinal residual stresses and technological properties of high-carbon steel wire. It has been found that the more»

$15.00 - Tech. Paper #P05239 (List Price) $0.00 - Tech. Paper #P05239 (Member Price)

No reviews
Lubricant considerations in wet steel wiredrawing

Lubricant considerations in wet steel wiredrawing

Dry lubricants for steel wiredrawing are the majority of the steel wiredrawing lubricant market and are nearly maintenance free. This is not the case for the wet drawing fluids used in fine gauge dramore»

$15.00 - Tech. Paper #P05086 (List Price) $0.00 - Tech. Paper #P05086 (Member Price)

No reviews
Lubricant evaluation laboratory for fine wiredrawing

Lubricant evaluation laboratory for fine wiredrawing

A highly instrumental draw bench designed and constructed for the evaluation of lubricants for wet fine wiredrawing is described. Through the measurement of the drawing force friction values are detemore»

$15.00 - Tech. Paper #P04423 (List Price) $0.00 - Tech. Paper #P04423 (Member Price)

No reviews
Lubricant manufacture.

Lubricant manufacture.

The manufacture of different types of lubricants is reviewed. Classifications of lubricants considered are powdered soap lubricants (insoluble, soluble, and special types), pastes or greases (water bmore»

$15.00 - Tech. Paper #P03190 (List Price) $0.00 - Tech. Paper #P03190 (Member Price)

No reviews
Lubricant selection

Lubricant selection

The action of lubricants in polymeric compositions is reviewed from an engineer's point of view, that is, with reference to pictorial depictions rather than from theoretical considerations. This pictmore»

$15.00 - Tech. Paper #P05049 (List Price) $0.00 - Tech. Paper #P05049 (Member Price)

No reviews
Machine vision solutions for in-line measurement of extruded, drawn or rolled profiles including various wire and cable constructions

Machine vision solutions for in-line measurement of extruded, drawn or rolled profiles including various wire and cable constructions

This paper covers the combination of laser contouring and advanced machine vision system techniques that enable the in-line dimensional measurement of shapes or profiles as are routinely found in themore»

$15.00 - Tech. Paper #P04788 (List Price) $0.00 - Tech. Paper #P04788 (Member Price)

No reviews
Maerz Direct-to-Wire® Technology – Optimized FRHC Copper Production

Maerz Direct-to-Wire® Technology – Optimized FRHC Copper Production

Direct-to-Wire® Technology is a new fire-refining technology for the optimized production of fire-refined high-conductivity copper rod (FRHC copper rod) from copper scrap. The technology is based on more»

$15.00 - Tech. Paper #P05468 (List Price) $0.00 - Tech. Paper #P05468 (Member Price)

No reviews
Magnetic and magnetic particle brakes for wire tensioning

Magnetic and magnetic particle brakes for wire tensioning

This paper will review the use of magnetic and magnetic particle brakes for the control of unwind and nip rolls in wire manufacturing processes. It will examine the criteria for sizing/selection and more»

$15.00 - Tech. Paper #P04969 (List Price) $0.00 - Tech. Paper #P04969 (Member Price)

No reviews
Maintenance of wiredrawing emulsions: a dynamic process and system

Maintenance of wiredrawing emulsions: a dynamic process and system

Wiredrawing emulsions must be routinely maintained in order to insure the emulsion exhibits optimal stability, thereby instilling an overall stability to the wiredrawing process. The ability to maintmore»

$15.00 - Tech. Paper #P05070 (List Price) $0.00 - Tech. Paper #P05070 (Member Price)

No reviews
Maintenance, design, measuring and pressure lubrication of the wiredrawing die

Maintenance, design, measuring and pressure lubrication of the wiredrawing die

The paper covers the following subject areas: die nomenclature—determining meeting point diameters; die design—selecting the correct contact point in the approach angle relating to drafting and reducmore»

$15.00 - Tech. Paper #P04760 (List Price) $0.00 - Tech. Paper #P04760 (Member Price)

No reviews
Major improvements in galvanizing heating systems

Major improvements in galvanizing heating systems

To control the costs, especially as far as the Galvanizing lines are concerned, please note that many elements are involved in the Galvanizing costs which include: • The system’s operability (numbermore»

$15.00 - Tech. Paper #P05488 (List Price) $0.00 - Tech. Paper #P05488 (Member Price)

No reviews
Making quality steel wire at optimum productivity

Making quality steel wire at optimum productivity

This paper explains the importance of good feedstock, discusses the effects of wiredrawing and explains proper die lineup and selection.

$15.00 - Tech. Paper #P03867 (List Price) $0.00 - Tech. Paper #P03867 (Member Price)

No reviews
Making satisfactory welded joints in wire by resistance welding.

Making satisfactory welded joints in wire by resistance welding.

Technical data on resistance welding of wire are presented. Considerations regarding the setting up of the welding machine include strength, appearance and set down of final weld, welding electrodes,more»

$15.00 - Tech. Paper #P01196 (List Price) $0.00 - Tech. Paper #P01196 (Member Price)

No reviews
Managing health and safety issues in wire and cable

Managing health and safety issues in wire and cable

The cost of doing business today extends beyond creating a product or providing a service. Work related incidents are consuming a greater percent of our working capital each year. Health care costs more»

$15.00 - Tech. Paper #P04044 (List Price) $0.00 - Tech. Paper #P04044 (Member Price)

No reviews
Manufacture and application of copperclad wire

Manufacture and application of copperclad wire

The use of copperclad wires for use in lamps, resistors, and diodes is discussed from the perspective of manufacturing methods and applications. The two major types of copperclad wires are 'Dumet' amore»

$15.00 - Tech. Paper #P03772 (List Price) $0.00 - Tech. Paper #P03772 (Member Price)

No reviews
Manufacturing and quality control in the production of steel and wire rod for tire cord

Manufacturing and quality control in the production of steel and wire rod for tire cord

The production of high quality steel for tire cord applications is discussed. Trace elements, carbon content, control of manganese by RH degassing, phosphorus and sulfur, cleanliness, the identificatmore»

$15.00 - Tech. Paper #P03057 (List Price) $0.00 - Tech. Paper #P03057 (Member Price)

No reviews
Manufacturing highly loadable helical springs through optimization of tempering processes in both spring steel wire and spring production

Manufacturing highly loadable helical springs through optimization of tempering processes in both spring steel wire and spring production

Recent research activities have shown that for improving the strength and forming behaviour of oil-hardened and tempered spring steel wire the tempering processes of both wire and spring production nmore»

$15.00 - Tech. Paper #P05480 (List Price) $0.00 - Tech. Paper #P05480 (Member Price)

No reviews
Manufacturing of data communication cables using high-speed backtwist technology

Manufacturing of data communication cables using high-speed backtwist technology

The paper discusses how the introduction of backtwist technology into the twinning process has allowed for a more generous process window, particularly to concentricity, which affects impedance, strumore»

$15.00 - Tech. Paper #P04806 (List Price) $0.00 - Tech. Paper #P04806 (Member Price)

No reviews
Manufacturing of data communication cables using high-speed backtwist technology and the impact of fluorinated ethylene propylene (FEP) on productivity

Manufacturing of data communication cables using high-speed backtwist technology and the impact of fluorinated ethylene propylene (FEP) on productivity

Fluorinated Ethylene Propylene (FEP) has been used for fire retardancy in data cable for many years in the North American market. Due to its construction, it has had a negative effect on productivitymore»

$15.00 - Tech. Paper #P05028 (List Price) $0.00 - Tech. Paper #P05028 (Member Price)

No reviews
Material savings by utilizing in-line dimensional measurement and control

Material savings by utilizing in-line dimensional measurement and control

To compete in today’s markets, it is a necessity to reduce operating costs. However, cutting costs cannot mean sacrificing a high quality standard. This paper explains how an in-line measurement and more»

$15.00 - Tech. Paper #P05350 (List Price) $0.00 - Tech. Paper #P05350 (Member Price)

No reviews
Materials response to wiredrawing

Materials response to wiredrawing

Material problems in wire, rod and tube drawing can seldom be solved by materials science alone. It is true that the physical metallurgist, based on sophisticated investigation techniques, can descrmore»

$15.00 - Tech. Paper #P03916 (List Price) $0.00 - Tech. Paper #P03916(Member Price)

No reviews
Materials restrictions and the global marketplace—The phasing-out of lead and other hazardous substances

Materials restrictions and the global marketplace—The phasing-out of lead and other hazardous substances

There is a growing movement, particularly in Europe and Japan, to control the end-of-life disposal of electrical and electronic equipment and to phase out the use in that equipment of some hazardous more»

$15.00 - Tech. Paper #P04984 (List Price) $0.00 - Tech. Paper #P04984 (Member Price)

No reviews
Mathematical model simulating thin-diameter steel wire drawing in the presence of back tension

Mathematical model simulating thin-diameter steel wire drawing in the presence of back tension

This paper discusses the mathematical apparatus of calculation of energy-power parameters for the process of drawing wire of thin diameters by multiple machines.

$15.00 - Tech. Paper #P05222 (List Price) $0.00 - Tech. Paper #P05222 (Member Price)

No reviews
Measurement of annealing behavior of copper rod and wire.

Measurement of annealing behavior of copper rod and wire.

Results of experiments on copper rod and wire annealing are presented. Hardness, spring back, elongation, and half-hard temperature are correlated with annealing time and temperature. The tests can bmore»

$15.00 - Tech. Paper #P02704 (List Price) $0.00 - Tech. Paper #P02704 (Member Price)

No reviews
Measurement of small diameter wire stress relaxation using dynamic techniques

Measurement of small diameter wire stress relaxation using dynamic techniques

A dynamic measurement technique for measuring stress relaxation of small diameter wire was developed. The effects of stress relief and processing history were evaluated using this technique. Nonferromore»

$15.00 - Tech. Paper #P04548 (List Price) $0.00 - Tech. Paper #P04548 (Member Price)

No reviews
Measuring progress in the wire and cable industry

Measuring progress in the wire and cable industry

Seeing the potential in non-contact laser technology was the key to creating systems that enabled wire and cable manufacturers to produce cables with a far greater degree of accuracy.

$15.00 - Tech. Paper #P05217 (List Price) $0.00 - Tech. Paper #P05217 (Member Price)

No reviews
Measuring the effective use of wire and processing mills

Measuring the effective use of wire and processing mills

Many of the traditional methods of measuring the use of our mills by various formulas for calculating "efficiency" and "utilization" do not accurately reflect a mill’s true efficiency, utilization ormore»

$15.00 - Tech. Paper #P04774 (List Price) $0.00 - Tech. Paper #P04774 (Member Price)

No reviews
Mechanical analysis of polymers aged in optical cable filling compounds

Mechanical analysis of polymers aged in optical cable filling compounds

An investigation of the mechanical properties of natural and synthetic hydrocarbon carrier based filling compounds was undertaken, and several of the filling compounds were then used in compatibilitymore»

$15.00 - Tech. Paper #P04431 (List Price) $0.00 - Tech. Paper #P04431 (Member Price)

No reviews
Mechanical blast cleaning of wire rods.

Mechanical blast cleaning of wire rods.

A shot blast cleaning method for descaling wire rod is discussed. The development of this process, the basis of the process, and its use in conjunction with drawing are described and illustrated.

$15.00 - Tech. Paper #P01604 (List Price) $0.00 - Tech. Paper #P01604 (Member Price)

No reviews
Mechanical properties of molybdenum alloys wires

Mechanical properties of molybdenum alloys wires

The paper describes deformation behaviour, mechanical properties and structure of drawn molybdenum wires at elevated temperatures and heat treated by annealing at various temperatures. Introductory pmore»

$15.00 - Tech. Paper #P05341 (List Price) $0.00 - Tech. Paper #P05341 (Member Price)

No reviews
Mechanical relaxation spectroscopy in steel wire research

Mechanical relaxation spectroscopy in steel wire research

The primary driving force in steel research today is the need to produce a higher quality product within a rapidly narrowing specification range. As a result, thereis a need for new or improved matemore»

$15.00 - Tech. Paper #P03931 (List Price) $0.00 - Tech. Paper #P03931 (Member Price)

No reviews
Mechanical vapor recompression applied to acid rinse water recovery at Nexans' copper rod mill

Mechanical vapor recompression applied to acid rinse water recovery at Nexans' copper rod mill

Nexans’ Montreal copper rod mill installed a Mechanical Vapor Recompression system to separate and recover sulfuric acid and water from the acid-pickling rinse circuit. This was the first installatiomore»

$15.00 - Tech. Paper #P04933 (List Price) $0.00 - Tech. Paper #P04933 (Member Price)

No reviews
Mechanics of the slipping capstan.

Mechanics of the slipping capstan.

The mathematical basis of various aspects of the mechanics of the slipping capstan are presented. Friction, tension, multiple capstans in tandem, power loss, as well as the advantages and disadvantagmore»

$15.00 - Tech. Paper #P01549 (List Price) $0.00 - Tech. Paper #P01549 (Member Price)

No reviews
Mechanics of wire rope

Mechanics of wire rope

This presentation by the 2003 Mordica Lecturer, an expert in the mechanics of wire ropes, discusses how an understanding of mechanics can be used to solve problems.

$15.00 - Tech. Paper #P04948 (List Price) $0.00 - Tech. Paper #P04948 (Member Price)

No reviews
Mechanisms of wire breaks.

Mechanisms of wire breaks.

A mathematical analysis of wire breaks, specifically 'center burst' or 'cuppy core', and 'crow's feet' mode is provided. The purpose of this is to survey some fundamental concopts of fracture theory more»

$15.00 - Tech. Paper #P03440 (List Price) $0.00 - Tech. Paper #P03440 (Member Price)

No reviews
Media filtration for nonferrous wiredrawing coolant

Media filtration for nonferrous wiredrawing coolant

A vast assortment of nonwoven media is available for coolant filtration. Plodding through these choices can be time-consuming and expensive. This paper examines the fundamentals of media properties, more»

$15.00 - Tech. Paper #P05118 (List Price) $0.00 - Tech. Paper #P05118 (Member Price)

No reviews
Meeting rod quality requirements in the 21st century

Meeting rod quality requirements in the 21st century

Reject rates in the ppm range are often required for rod produced up to 10 km per min. It is no longer possible to ensure today’s required quality levels using traditional inspection techniques. Thismore»

$15.00 - Tech. Paper #P04941 (List Price) $0.00 - Tech. Paper #P04941 (Member Price)

No reviews
Melt-to-tensile high carbon rods for direct drawn wire applications

Melt-to-tensile high carbon rods for direct drawn wire applications

With the continuing trend for more wire applications to be met with as-rolled rods drawn to the finish diameter, the need for specifying rods by tensile strength becomes more and more important. Thismore»

$15.00 - Tech. Paper #P04239 (List Price) $0.00 - Tech. Paper #P04239 (Member Price)

No reviews
Metal hydroxides for flame retardant wire and cable compounds

Metal hydroxides for flame retardant wire and cable compounds

This paper discusses use of metal hydroxides such as aluminum trihydroxide (ATH) and magnesium hydroxide (MDH) as flame retardant additives for wire and cable compound applications. Effects of partimore»

$15.00 - Tech. Paper #P05075 (List Price) $0.00 - Tech. Paper #P05075 (Member Price)

No reviews
Metal tape forming and welding line for MV, HV and EHV power cables

Metal tape forming and welding line for MV, HV and EHV power cables

For many years it has been very popular to cover MV, HV and EHV cables with extruded lead or aluminum or with longitudinal applied Al/PE tapes. The requirements are changing all the time and nowadaysmore»

$15.00 - Tech. Paper #P05490 (List Price) $0.00 - Tech. Paper #P05490 (Member Price)

No reviews
Metallurgical analysis of resistance welds

Metallurgical analysis of resistance welds

Exhaustive metallurgical analyses of composition and microstructure were carried out to determine the cause of resistance butt-weld failures in brass-coated plain-carbon steel wire. Two types of failmore»

$15.00 - Tech. Paper #P02930 (List Price) $0.00 - Tech. Paper #P02930 (Member Price)

No reviews
Metallurgical and wiredrawing performance comparison of ETP and oxygen-free copper

Metallurgical and wiredrawing performance comparison of ETP and oxygen-free copper

The differences in manufacturing ETP and oxygen-free copper products are reflected in their metallurgical and physical characteristics, which ultimately defines their performance and suitability for more»

$15.00 - Tech. Paper #P05223 (List Price) $0.00 - Tech. Paper #P05223 (Member Price)

No reviews
Metallurgy of Triple-E -- a new alloy concept.

Metallurgy of Triple-E -- a new alloy concept.

The development of a new aluminum alloy is described. The experimental procedures and tests involved in the development of Triple-E electrical conductor, its creep strength, tensile strength, elongatmore»

$15.00 - Tech. Paper #P02803 (List Price) $0.00 - Tech. Paper #P02803 (Member Price)

No reviews
Method and material for manufacture of rectangular wire coil springs without dynamic strain aging

Method and material for manufacture of rectangular wire coil springs without dynamic strain aging

Loss of ductility is experienced in steel springs when the coil spring is dynamically strained or deformed. This phenomenon, known as dynamic strain aging or blue brittleness, occurs in steels with imore»

$15.00 - Tech. Paper #P05214 (List Price) $0.00 - Tech. Paper #P05214 (Member Price)

No reviews
Method for suppressing the surface cracking in cold forging

Method for suppressing the surface cracking in cold forging

A criterion to predict surface crack occurrence in cold forging was proposed, and a method for suppressing cracking in production lines was investigated for a typical cold-forged steel, AISI105. Tesmore»

$15.00 - Tech. Paper #P04912 (List Price) $0.00 - Tech. Paper #P04912 (Member Price)

No reviews
Method to improve straightness and remove torsion of uncoiled wires

Method to improve straightness and remove torsion of uncoiled wires

Recently, straight and twist-free wires have been in high demand for various industries. However stocking wires in drums can cause the wires to have bends or twists. The purpose of this paper is to fmore»

$15.00 - Tech. Paper #P05391 (List Price) $0.00 - Tech. Paper #P05391 (Member Price)

No reviews
Methods of heating and cooling wire, Part I

Methods of heating and cooling wire, Part I

Factors affecting quality, uniformity, finish and cost of the heating and cooling of wire are discussed. Uniform exposure and temperature of heating, and uniformity of cooling, are of primary importamore»

$15.00 - Tech. Paper #P00345 (List Price) $0.00 - Tech. Paper #P00345 (Member Price)

No reviews
Methods of testing and criteria for estimating the quality of technological lubricants used in wiredrawing

Methods of testing and criteria for estimating the quality of technological lubricants used in wiredrawing

Technological lubricants have to fulfill many functions when used in the process of plastic working, such as drawing wire, bars and tubes. This work is concerned with physical, chemical, tribologicalmore»

$15.00 - Tech. Paper #P04755 (List Price) $0.00 - Tech. Paper #P04755 (Member Price)

No reviews
Mexican experiences in eddy current testing

Mexican experiences in eddy current testing

Several influencing factors affect the results of data gathered during eddy current inspection for detecting surface defects on wire, primarily those regarding the acceptance criteria for testing wirmore»

$15.00 - Tech. Paper #P04739 (List Price) $0.00 - Tech. Paper #P04739 (Member Price)

No reviews
Microalloyed Balnitic Steels for 10.9 Strength Class Fasteners

Microalloyed Balnitic Steels for 10.9 Strength Class Fasteners

Based on Belgo Mineira's experience with microalloyed steels for fabricating 8.8 strength class non-quench and tempered bolts, a new steel was developed to reach a higher strength class. To obtain tmore»

$15.00 - Tech. Paper #P04113 (List Price) $0.00 - Tech. Paper #P04113 (Member Price)

No reviews
Microhardness and plastic flow investigations of bimetallic rod for drawing

Microhardness and plastic flow investigations of bimetallic rod for drawing

This paper describes research into the microhardness in the cross section of a Cu-Fe joint of bimetallic rod and plastic flow of its layer during rolling in a stretching pass from an initial bar prodmore»

$15.00 - Tech. Paper #P04750 (List Price) $0.00 - Tech. Paper #P04750 (Member Price)

No reviews
Microrolling: cold rolling wires of unusual diameters.

Microrolling: cold rolling wires of unusual diameters.

The Properzi process for rolling of copper, aluminum, and steel to finished wire diameters as small as 14 gauge is discussed. Rolling torques, roll separating forces, roll profiles, entry and exit spmore»

$15.00 - Tech. Paper #P03264 (List Price) $0.00 - Tech. Paper #P03264 (Member Price)

No reviews
Microstructure controls of wire rod for drawing without patenting

Microstructure controls of wire rod for drawing without patenting

To manufacture steel wires without patenting, wire rods should exhibit high enough ductility to prevent breakage during wiredrawing. The reduction of the crack initiation sites such as cementite and more»

$15.00 - Tech. Paper #P04674 (List Price) $0.00 - Tech. Paper #P04674 (Member Price)

No reviews
Minimizing cable costs by intelligent selection

Minimizing cable costs by intelligent selection

In an environment of unpredictable oil prices, choosing the optimum ESP power cable for your application becomes more important in order to maximize cable run life. This paper will explore some of thmore»

$15.00 - Tech. Paper #P04766 (List Price) $0.00 - Tech. Paper #P04766 (Member Price)

No reviews
Minimizing power and energy consumption in the Outokumpu UPCAST® process

Minimizing power and energy consumption in the Outokumpu UPCAST® process

New international agreements based on environmental concerns tend to view energy as an expensive commodity. The Outokumpu UPCAST® process a net shape casting process for the production of copper wiremore»

$15.00 - Tech. Paper #P04942 (List Price) $0.00 - Tech. Paper #P04942 (Member Price)

No reviews
Minimizing the deleterious effects of nitrogen to improve wire quality

Minimizing the deleterious effects of nitrogen to improve wire quality

Nitrogen and, to a lesser extent, hydrogen have a major impact on steel production and performance. Opportunities exist in the wire industry to minimize their deleterious effects through the applicatmore»

$15.00 - Tech. Paper #P05076 (List Price) $0.00 - Tech. Paper #P05076 (Member Price)

No reviews
Modeling centerline damage with DEFORM®

Modeling centerline damage with DEFORM®

The DEFORM® metalworking modeling system can be applied to the development of centerline damage, by way of the Cockcroft and Latham workability criterion, and this paper summarizes such recent work amore»

$15.00 - Tech. Paper #P05520 (List Price) $0.00 - Tech. Paper #P05520 (Member Price)

No reviews
Modeling of the delamination of high strength steel wire

Modeling of the delamination of high strength steel wire

One of the main obstacles to higher strength of drawn full pearlitic steel wires has been the delamination syndrome. The objectives of this study have been, by modeling, to predict in theory and to cmore»

$15.00 - Tech. Paper #P04510 (List Price) $0.00 - Tech. Paper #P04510 (Member Price)

No reviews
Modeling the drawing of ultra-fine wire

Modeling the drawing of ultra-fine wire

In the ultra-fine range, microstructural details and loading anomalies are important, size-related considerations. This paper addresses such considerations and extends classical drawing analysis intomore»

$15.00 - Tech. Paper #P05002 (List Price) $0.00 - Tech. Paper #P05002 (Member Price)

No reviews
Modern building wire production—rod breakdown, multiwire drawing, and bunching

Modern building wire production—rod breakdown, multiwire drawing, and bunching

The challenge in today’s building wire manufacturing industry is to maximize productivity through superior technology, know-how, and service. Highly efficient multiwire drawing machines, inline anneamore»

$15.00 - Tech. Paper #P05191 (List Price) $0.00 - Tech. Paper #P05191 (Member Price)

No reviews
Modern centrifugation and the maintenance of wiredrawing lubricants

Modern centrifugation and the maintenance of wiredrawing lubricants

This paper reviews the latest centrifuge technologies for cleaning and maintaining oil and emulsion lubricants for nonferrous wiredrawing. It will emphasize system design with regard to coolant delivmore»

$15.00 - Tech. Paper #P04928 (List Price) $0.00 - Tech. Paper #P04928 (Member Price)

No reviews
Modern machines for production of steel strand and rope with direct cabling and indirect double-twist cabling

Modern machines for production of steel strand and rope with direct cabling and indirect double-twist cabling

Indirect cabling is the method by which wires or simple strands are twisted around their own axes (twisting of the wires and double twisting of the strands). These twists become double twists around more»

$15.00 - Tech. Paper #P05241 (List Price) $0.00 - Tech. Paper #P05241 (Member Price)

No reviews
Modern production technology of trolley wires with the use of polycrystalline diamond (PCD) dies, designed for high-speed railways

Modern production technology of trolley wires with the use of polycrystalline diamond (PCD) dies, designed for high-speed railways

Standard die inserts for drawing trolley wire are made from tungsten carbide (WC). The asymmetrical shape of the drawn material and high cross-section strain heterogeneity results in a high level of more»

$15.00 - Tech. Paper #P05496 (List Price) $0.00 - Tech. Paper #P05496 (Member Price)

No reviews
Modern straightening and cutting equipment.

Modern straightening and cutting equipment.

The operating principles, variations in design, and modern developments in the field of wire straightening and cutting are discussed. Roll type straighteners, slide feed, and tube straighteners are dmore»

$15.00 - Tech. Paper #P01475 (List Price) $0.00 - Tech. Paper #P01475 (Member Price)

No reviews
Modern technology of fine copper wiredrawing

Modern technology of fine copper wiredrawing

A prototype fine copper wiredrawing machine, KDC, developed by Bekaert is described. Practical drawing speeds; reel imbalance vibration; slipping, cooling, and lubrication; machine noise levels and smore»

$15.00 - Tech. Paper #P02956 (List Price) $0.00 - Tech. Paper #P02956 (Member Price)

No reviews
Modernization in the wire industry: rebirth of a wiredrawing machine

Modernization in the wire industry: rebirth of a wiredrawing machine

Possible results and expanded productivity requirements of modernizing an old wiredrawing machine are given. Drives and controls, mechanical updating, and reconditioning are discussed. A case historymore»

$15.00 - Tech. Paper #P03319 (List Price) $0.00 - Tech. Paper #P03319 (Member Price)

No reviews
Modernization of Stelmor conveyor systems for expanded process capability and improved product quality

Modernization of Stelmor conveyor systems for expanded process capability and improved product quality

The process capability and flexibility of controlled cooling lines in existing rod rolling mills can often be significantly improved through modernization with state-of-the-art roller conveyor equipmmore»

$15.00 - Tech. Paper #P05016 (List Price) $0.00 - Tech. Paper #P05016 (Member Price)

No reviews
Modernization opportunities for today’s aluminum mills

Modernization opportunities for today’s aluminum mills

Close to half of today’s aluminum mills are more than 20 years old. A number of modernization steps offer ways to extend mill life and reduce maintenance costs, improve reliability, increase productimore»

$15.00 - Tech. Paper #P05521 (List Price) $0.00 - Tech. Paper #P05521 (Member Price)

No reviews
Modification of steel structure and schedule of drawing for quality improvement of CuttySharp wires

Modification of steel structure and schedule of drawing for quality improvement of CuttySharp wires

This study investigates quality improvement of 88MnCrW5 alloy steel through modification of heat treatment parameters for the rod and drawing schedule for the final wire. Two variants of drawing in nmore»

$15.00 - Tech. Paper #P05309 (List Price) $0.00 - Tech. Paper #P05309 (Member Price)

No reviews
Monitoring of the wiredrawing process

Monitoring of the wiredrawing process

Manual monitoring for flaws, which is dependent on operator experience, is normal praxis during wiredrawing. This paper investigates different methods to monitor the drawing process. Force measuremenmore»

$15.00 - Tech. Paper #P05531 (List Price) $0.00 - Tech. Paper #P05531 (Member Price)

No reviews
MTX wiredrawing machine

MTX wiredrawing machine

Due to the success of the first MTX 180/12 wiredrawing machine for fine steel wire, a complete range of machines has been developed with block sizes from 150 to 500 mm for final wire diameters from 0more»

$15.00 - Tech. Paper #P05139 (List Price) $0.00 - Tech. Paper #P05139 (Member Price)

No reviews
Multi-melt point wiredrawing lubricants: Design and theory

Multi-melt point wiredrawing lubricants: Design and theory

Multi-melt point soap lubricants can offer a wiredrawer the advantage of having a single, versatile lubricant to run various wiredrawing processes in their facility. This paper will discuss how thesemore»

$15.00 - Tech. Paper #P04594 (List Price) $0.00 - Tech. Paper #P04594 (Member Price)

No reviews
Multiple effects

Multiple effects

Over the years, increasing pressure to achieve or retain a competitive edge has led engineers to increase the operational speeds and thereby the production rates of cable-making and twist-stranding mmore»

$15.00 - Tech. Paper #P05054 (List Price) $0.00 - Tech. Paper #P05054 (Member Price)

No reviews
Multi-scale model of Mg alloys wiredrawing process

Multi-scale model of Mg alloys wiredrawing process

This paper considers the development of a mathematical model for drawing MgCa08 wire with an option for fracture phenomena prediction in micro scale. The first part focuses on experimental studies thmore»

$15.00 - Tech. Paper #P05394 (List Price) $0.00 - Tech. Paper #P05394 (Member Price)

No reviews
Multi-wire technology applied for production of nickel-coated wires and AL5154 and AL6101 alloys

Multi-wire technology applied for production of nickel-coated wires and AL5154 and AL6101 alloys

This paper will cover some basic principles and equipment of multi-wire technology as well as process consideration and focus on the use of the technology for a specific area: nickel-coated wires andmore»

$15.00 - Tech. Paper #P04963 (List Price) $0.00 - Tech. Paper #P04963 (Member Price)

No reviews
My 35 years of research on wiredrawing

My 35 years of research on wiredrawing

The 2011 Mordica Memorial Lecture presents a summary of papers written or co-written by the author through his 35-year research of wiredrawing. The main topics are the effect of oxygen content on innmore»

$15.00 - Tech. Paper #P05443 (List Price) $0.00 - Tech. Paper #P05443 (Member Price)

No reviews
My professional career and experiences in the wire industry

My professional career and experiences in the wire industry

The lecture presents a review of the author’s professional journey from intern to proud recipient of the Mordica Memorial Award. This journey progressed from simple resistivity measurements on steel more»

$15.00 - Tech. Paper #P05316 (List Price) $0.00 - Tech. Paper #P05316 (Member Price)

No reviews
Nanotechnology - How small is the nanoworld in the cable industry?

Nanotechnology - How small is the nanoworld in the cable industry?

Nanotechnology presents opportunities for creating attractive cable products and allowing cheaper and easier production processes such as cross-linking and fluoroplastics; carbon nanotube and nanoclamore»

$15.00 - Tech. Paper #P05203 (List Price) $0.00 - Tech. Paper #P05203 (Member Price)

No reviews
Nassau's process for continuous casting and rolling of copper rod.

Nassau's process for continuous casting and rolling of copper rod.

A method of continuous casting and rolling of copper rod developed by Nassau Smelting & Refining Co is discussed; electrical conductors are produced by drawing the rod through a series of successivelmore»

$15.00 - Tech. Paper #P02391 (List Price) $0.00 - Tech. Paper #P02391 (Member Price)

No reviews
New aluminum alloy conductor MSAL.

New aluminum alloy conductor MSAL.

The characteristics and properties of the aluminum conductor MSAL are described and compared with other conductor alloys. Properties of hard wire made from MSAL, tensile strength and electrical condumore»

$15.00 - Tech. Paper #P02770 (List Price) $0.00 - Tech. Paper #P02770 (Member Price)

No reviews
New approach for estimation of fatigue strength of wire rope

New approach for estimation of fatigue strength of wire rope

This paper proposes a new approach to calculation of the fatigue strength of uncoated and zinc-coated wire rope. The proposed method offers the advantage of estimating fatigue properties on the basismore»

$15.00 - Tech. Paper #P05326 (List Price) $0.00 - Tech. Paper #P05326 (Member Price)

No reviews
New B.I.S.R.A. narrow gap capstan improves cooling efficiency on drawing machines

New B.I.S.R.A. narrow gap capstan improves cooling efficiency on drawing machines

A narrow gap capstan is described which allows machines to operate at high speeds when drawing high carbon steel wire. Corrosion effects, internal water cooling research, full scale laboratory trialsmore»

$15.00 - Tech. Paper #P02130 (List Price) $0.00 - Tech. Paper #P02130 (Member Price)

No reviews
Results 601 to 700 of 1158.
Search Technical Papers (Enter a keyword, technical paper name or description):