Wirenet Image Band
wirenet.org mobile image band
Online Store Contact Us

View Cart
My Cart

There is 0 item(s) in your cart.
Sub-total
0.00
Technical Papers
Show per page
View As
Results 901 to 1000 of 1158.
Single and multi-wire induction heating in the wire industry

Single and multi-wire induction heating in the wire industry

In today’s world of environmental concerns and energy-saving processes, induction heating is beginning to become a more familiar site on the wire process line. In the traditional heat treatment line,more»

$15.00 - Tech. Paper #P05091 (List Price) $0.00 - Tech. Paper #P05091 (Member Price)

No reviews
Single-twist bunching.

Single-twist bunching.

Evaluation of desired strand quality, production cost, and savings of insulation is required for choice between single-twist and double-twist bunching for production of flexible conductors smaller thmore»

$15.00 - Tech. Paper #P03257 (List Price) $0.00 - Tech. Paper #P03257 (Member Price)

No reviews
Slow cooling rods on Cuyahoga Plant's No. 1 mill.

Slow cooling rods on Cuyahoga Plant's No. 1 mill.

The Spiracool process used for cooling steel rods at the Lorain-Cuyahoga Works of U.S. Steel Corp is described. Cooling rates below 0.56~C/second are achieved, and result in uniformly soft and ductilmore»

$15.00 - Tech. Paper #P03155 (List Price) $0.00 - Tech. Paper #P03155 (Member Price)

No reviews
Smart antennas for wireless mobile communication

Smart antennas for wireless mobile communication

This paper offers a complete view of the smart antenna,which is the vital part of wireless mobile communications. Smart antennas significantly improve wireless system performance and economics for a more»

$15.00 - Tech. Paper #P05120 (List Price) $0.00 - Tech. Paper #P05120 (Member Price)

No reviews
Smut removal using high performance ultrasound on high carbon steel wire

Smut removal using high performance ultrasound on high carbon steel wire

During the pickling of high carbon steel wire, variations in the process variables that result in over-etching often cause a dark smut formation. This smut consists of fine particle iron carbides thamore»

$15.00 - Tech. Paper #P04519 (List Price) $0.00 - Tech. Paper #P04519 (Member Price)

No reviews
Software tool for network reliability and availability analysis

Software tool for network reliability and availability analysis

This paper presents an easy-to-use software tool designed to simplify the planning, design, and optimization processes for fiber access networks, and save valuable time preparing network configuratiomore»

$15.00 - Tech. Paper #P05321 (List Price) $0.00 - Tech. Paper #P05321 (Member Price)

No reviews
Solid welding wire use keeps pace with fast growth in Mig process.

Solid welding wire use keeps pace with fast growth in Mig process.

The fast growth of the Mig welding process and developments in solid welding wire for this process are discussed. Non-copper-coated welding wire produces no toxic copper fumes and does not flake to cmore»

$15.00 - Tech. Paper #P03255 (List Price) $0.00 - Tech. Paper #P03255 (Member Price)

No reviews
Some aspects of drawing high-carbon steel wire for prestressed concrete strand

Some aspects of drawing high-carbon steel wire for prestressed concrete strand

It was concluded that the thick, high-tensile strength steel wire used for prestressed concrete strand can best be manufactured from high-tensile wire rod with fine pearlite structure. Deformation ofmore»

$15.00 - Tech. Paper #P03316 (List Price) $0.00 - Tech. Paper #P03316 (Member Price)

No reviews
Some aspects of management in wiredrawing and wire product plants

Some aspects of management in wiredrawing and wire product plants

Management in plants manufacturing wire and wire products have been described and compared in the case of a centrally planned economy (formerly socialistic countries) and in a free market economy. Remore»

$15.00 - Tech. Paper #P05096 (List Price) $0.00 - Tech. Paper #P05096 (Member Price)

No reviews
Some experiences in manufacturing of tin plated brass square wires with a size 1.2 mm

Some experiences in manufacturing of tin plated brass square wires with a size 1.2 mm

A brass square wire with a size of 1.2 mm is used as a joining element in telephonic centrals of “PENTACONTA” systems. In this study, four different variants of a production of this special type of wmore»

$15.00 - Tech. Paper #P05157 (List Price) $0.00 - Tech. Paper #P05157 (Member Price)

No reviews
Some indicators of drawability of steel wire rods and wires

Some indicators of drawability of steel wire rods and wires

In the work, drawability of steel wire rods and wires by means of 'r' indicator has been estimated. Values of 'r' are calculated as ratios of yield strength sp to 'breaking' strength Ro determined inmore»

$15.00 - Tech. Paper #P04502 (List Price) $0.00 - Tech. Paper #P04502 (Member Price)

No reviews
Some new concepts in wire handling.

Some new concepts in wire handling.

Wire handling methods to prevent damage and slip including the Vee Groove-Overlap capstan are discussed. The Vee Groove-Overlap capstan combined with new principles of overtwisting to kill torsion spmore»

$15.00 - Tech. Paper #P02181 (List Price) $0.00 - Tech. Paper #P02181 (Member Price)

No reviews
Some technical aspects of continuous spoolers used with wiredrawing machines

Some technical aspects of continuous spoolers used with wiredrawing machines

Two typical continuous spoolers are described: the Mark I to Mark IV series and the Mark VI to Mark VIII series. Typical production lines, wire tension, and maintenance are considered.

$15.00 - Tech. Paper #P03379 (List Price) $0.00 - Tech. Paper #P03379 (Member Price)

No reviews
Soot characteristics in copper continuous casting

Soot characteristics in copper continuous casting

The phenomena of secondary pyrolysis of soot particles during casting is examined. The belief that characteristics of soot determining the cooling rate during solidification are promoted as its strucmore»

$15.00 - Tech. Paper #P03682 (List Price) $0.00 - Tech. Paper #P03682 (Member Price)

No reviews
Southwire Continuous Rod process: innovations for quality improvements

Southwire Continuous Rod process: innovations for quality improvements

The Southwire Continuous Rod (SCR) process had been successfully used over the years in several plants around the world for producing copper rod. Emphasis has always been placed in the SCR process fmore»

$15.00 - Tech. Paper #P04158 (List Price) $0.00 - Tech. Paper #P04158 (Member Price)

No reviews
Specifying induction wire, rope and cable heating equipment

Specifying induction wire, rope and cable heating equipment

"This presentation discusses intricacies of specifying induction heating equipment for the wire industry. Special attention will be paid to selection of proper frequency, coil arrangement and power smore»

$15.00 - Tech. Paper #P04962 (List Price) $0.00 - Tech. Paper #P04962 (Member Price)

No reviews
Spent emulsion disposal.

Spent emulsion disposal.

The techniques of breaking water base emulsions for safe disposal are discussed. Physical, electrical, and chemical procedures and a thermal emulsion breaker are described.

$15.00 - Tech. Paper #P03408 (List Price) $0.00 - Tech. Paper #P03408 (Member Price)

No reviews
Spidem system for continuous casting and rolling of aluminum rod

Spidem system for continuous casting and rolling of aluminum rod

A continuous casting and rolling line for production of high-tonnage high-quality aluminum rod is described. The twist free mill, rollpass schedule, and production line are discussed.

$15.00 - Tech. Paper #P02739 (List Price) $0.00 - Tech. Paper #P02739 (Member Price)

No reviews
Spill prevention containment and countermeasures revisited

Spill prevention containment and countermeasures revisited

As early as 1974 the United States Environmental Protection Agency developed regulations concerning the storage of oil and oily substances. The program, regulations and requirements have changed and more»

$15.00 - Tech. Paper #P04926 (List Price) $0.00 - Tech. Paper #P04926 (Member Price)

No reviews
Spool package edge correction algorithm for fiber and fine wire spooling applications

Spool package edge correction algorithm for fiber and fine wire spooling applications

The Auto-Edge Correction Control Algorithm automatically and precisely adjusts spool winding turnaround positions to compensate for edge buildup or roll-off of wound fiber or fine wire material withomore»

$15.00 - Tech. Paper #P05171 (List Price) $0.00 - Tech. Paper #P05171 (Member Price)

No reviews
Stainless steel pickling processes with no toxic Cleanox® solutions

Stainless steel pickling processes with no toxic Cleanox® solutions

This paper describes innovative solutions available to reduce or eliminate the use of hydrofluoric acid in stainless steel pickling processes, a substance monitored closely by European authorities. Tmore»

$15.00 - Tech. Paper #P05167 (List Price) $0.00 - Tech. Paper #P05167 (Member Price)

No reviews
Stainless steel wire for the production of wire mesh.

Stainless steel wire for the production of wire mesh.

The manufacture of wire mesh from stainless steel wire is discussed. Composition of the steel, mechanical properties, work-hardening, spring-back, comparisons among various types of austenitic steel,more»

$15.00 - Tech. Paper #P02194 (List Price) $0.00 - Tech. Paper #P02194 (Member Price)

No reviews
Standard practices of modern German electrolytic plating plants

Standard practices of modern German electrolytic plating plants

Practices carried out in German electrolytic plating (zinc, brass, copper) plants are described briefly. Plating is carried out at high current density and with high efficiency. The equipment used ismore»

$15.00 - Tech. Paper #P02809 (List Price) $0.00 - Tech. Paper #P02809 (Member Price)

No reviews
Statistical experimental study of electrolytic phosphate coating deposition

Statistical experimental study of electrolytic phosphate coating deposition

"A novel electrolytic phosphate process is being developed that reduces precipitate sludge and increases the coating deposition rate while yielding very uniform coating weights and fine crystallinemore»

$15.00 - Tech. Paper #P05017 (List Price) $0.00 - Tech. Paper #P05017 (Member Price)

No reviews
Statistical process control and statistical quality control--using statistics to enhance process control results in the increased control of product quality as proven through statistical analysis

Statistical process control and statistical quality control--using statistics to enhance process control results in the increased control of product quality as proven through statistical analysis

Advances in closed loop control, combined with advances in statistical data gathering, work together to provide the competitive edge needed in today's market and into the 21st century. A process is more»

$15.00 - Tech. Paper #P04161 (List Price) $0.00 - Tech. Paper #P04161 (Member Price)

No reviews
Status of European research in the field of wire rods and high-strength wires

Status of European research in the field of wire rods and high-strength wires

The status of steel research in Europe, with particular emphasis on multi-partner projects sponsored by the European Community for Steel and Coal (ECSC) and the JOULE© Program, is reviewed through spmore»

$15.00 - Tech. Paper #P05031 (List Price) $0.00 - Tech. Paper #P05031 (Member Price)

No reviews
Steel cord production from cc-billets at ISPAT HSW

Steel cord production from cc-billets at ISPAT HSW

Based on its intended function as an integrated mini mill, ISPAT HSW demonstrates the reliability in a highly demanding market of an EAF/LF operation and conversion of cc-billets into wire rods withimore»

$15.00 - Tech. Paper #P05038 (List Price) $0.00 - Tech. Paper #P05038 (Member Price)

No reviews
Steel patenting technology in the manufacture of steel tire cord

Steel patenting technology in the manufacture of steel tire cord

Liquid Quenchant Fluidized Bed Technology (LQF – US Patent Pending) overcomes concurrency constraints and significantly reduces energy requirements by altering the forced convective heat transfer coemore»

$15.00 - Tech. Paper #P05285 (List Price) $0.00 - Tech. Paper #P05285 (Member Price)

No reviews
Steel wires and strands for the pre-stressing of concrete

Steel wires and strands for the pre-stressing of concrete

The presentation reflects on the development of very high strength steel wires and strands used for the compression of concrete. This has enabled the construction industry to utilize pre-stressed comore»

$15.00 - Tech. Paper #P05108 (List Price) $0.00 - Tech. Paper #P05108 (Member Price)

No reviews
Strain aging of an AISI 1070 steel

Strain aging of an AISI 1070 steel

In this work, hardening and strain aging during a high carbon wiredrawing operation were analyzed. With the tensile and yield strength values, measured in every step of the operation sequence, the hamore»

$15.00 - Tech. Paper #P04846 (List Price) $0.00 - Tech. Paper #P04846 (Member Price)

No reviews
Strain aging of carbon steel wires

Strain aging of carbon steel wires

Strain aging refers to changes in mechanical and physical properties resulting from elastic interactions of solute atoms in solid solution with strain fields of dislocations. Strain aging of drawn camore»

$0.00 - Tech. Paper #P05629 (Member Price) $15.00 - Tech. Paper #P05629 (List Price)

No reviews
Strain aging of pearlitic steel rod

Strain aging of pearlitic steel rod

The strain aging of a pearlitic steel wire rod prestrained in tension was studied, aiming to compare the characteristics of the phenomenon with those of strain aging in drawn pearlitic steels. It wasmore»

$15.00 - Tech. Paper #P04584 (List Price) $0.00 - Tech. Paper #P04584 (Member Price)

No reviews
Strand annealing of nickel base alloys.

Strand annealing of nickel base alloys.

Strand annealing of nickel base alloys is discussed. The equipment used and control of time, temperature, furnace atmosphere, and wire properties are considered.

$15.00 - Tech. Paper #P02284 (List Price) $0.00 - Tech. Paper #P02284 (Member Price)

No reviews
Strand compaction in steel wire ropes

Strand compaction in steel wire ropes

Strand compaction has been widely used by the Wire Rope Industry over many years but at times it has been applied as an indiscriminate response to service life problems, rather than through selectivemore»

$15.00 - Tech. Paper #P05487 (List Price) $0.00 - Tech. Paper #P05487 (Member Price)

No reviews
Strand design using a single input wire diameter

Strand design using a single input wire diameter

Imagine the advantages of setting up the non-ferrous Wire Drawing machine and never having to change the string up because a new wire diameter is required. Imagine setting up a stranding capacity whmore»

$15.00 - Tech. Paper #P04027 (List Price) $0.00 - Tech. Paper #P04027 (Member Price)

No reviews
Stranding and laying up of low and medium voltage conductors

Stranding and laying up of low and medium voltage conductors

In the past decade there have been some important newcomers to the field of wire and cable production equipment, such as the central strander and the monobitorsion strander. This equipment implementsmore»

$15.00 - Tech. Paper #P05135 (List Price) $0.00 - Tech. Paper #P05135 (Member Price)

No reviews
Strategic management for optimal utilization of wire rope

Strategic management for optimal utilization of wire rope

Organizations that use wire rope need risk- and reliability-centered planning, value-added planning, and life cycle planning for optimal operation in a safe, reliable, cost-effective, and consistent more»

$15.00 - Tech. Paper #P05426 (List Price) $0.00 - Tech. Paper #P05426 (Member Price)

No reviews
Strategies for optimizing cable design and performance through the use of bimetallic wire

Strategies for optimizing cable design and performance through the use of bimetallic wire

Copper clad steel (CCS) and copper clad aluminum (CCA) wire are two types of bimetallic wire used extensively in several industries, but are not common in the automotive industry. This paper will expmore»

$15.00 - Tech. Paper #P04770 (List Price) $0.00 - Tech. Paper #P04770 (Member Price)

No reviews
Strength-microstructure relationships in pearlitic eutectoid and hypereutectoid steels

Strength-microstructure relationships in pearlitic eutectoid and hypereutectoid steels

The strengths of patented eutectoid and hypereutectoid steels are strongly dependent upon the microstructures developed during the patenting process. Microstructural features can include pearlite intmore»

$15.00 - Tech. Paper #P04947 (List Price) $0.00 - Tech. Paper #P04947 (Member Price)

No reviews
Stress development in 1350-H14 aluminum rod drawing

Stress development in 1350-H14 aluminum rod drawing

This paper examines cold-work hardening, as it occurs within a rod breakdown machine, in detail for aluminum rod from various sources in order to explain observed differences in processability in a wmore»

$15.00 - Tech. Paper #P05333 (List Price) $0.00 - Tech. Paper #P05333 (Member Price)

No reviews
Studies of copper wire breaks in ultra fine gauge

Studies of copper wire breaks in ultra fine gauge

The drawability of ultra fine wires in continuous casting and rolling was improved as a result of investigations which determined that the diminuation of inclusions in copper rod was most important tmore»

$15.00 - Tech. Paper #P03767 (List Price) $0.00 - Tech. Paper #P03767 (Member Price)

No reviews
Study on parameters influencing the corrosion of metallic coatings on wire exposed to marine environments

Study on parameters influencing the corrosion of metallic coatings on wire exposed to marine environments

This study focuses on the influence of specific parameters on wire corrosion with special emphasis on zinc and Zn-5%Al coatings. The mode of capture of marine aerosols and the influence of wire surfamore»

$15.00 - Tech. Paper #P05216 (List Price) $0.00 - Tech. Paper #P05216 (Member Price)

No reviews
Successful application of motion control technology in wire manufacturing

Successful application of motion control technology in wire manufacturing

At the heart of many wire manufacturing machines or processes is some type of electrical motion control system. The varieties found in the wire and cable industries include AC, DC, stepper, and servomore»

$15.00 - Tech. Paper #P04966 (List Price) $0.00 - Tech. Paper #P04966 (Member Price)

No reviews
Successfully establishing E-beam crosslinking process conditions for the wire and cable industry

Successfully establishing E-beam crosslinking process conditions for the wire and cable industry

The objective of this paper is to emphasize the relative simplicity of the crosslinking process using E-Beam equipment which is based purely on physical fundamentals and outline an alternative methodmore»

$15.00 - Tech. Paper #P04393 (List Price) $0.00 - Tech. Paper #P04393 (Member Price)

No reviews
Superconductor Fabrication at Oxford Superconducting Technology

Superconductor Fabrication at Oxford Superconducting Technology

Superconductivity allows electricity to flow in a substance without any resistance at temperatures near absolute zero. Growth in the field of super-conductivity is illustrated by the number of relatmore»

$15.00 - Tech. Paper #P04081 (List Price) $0.00 - Tech. Paper #P04081 (Member Price)

No reviews
Super-plastic behavior of duplex stainless steel wires

Super-plastic behavior of duplex stainless steel wires

The authors tested ER312 and ER2209 duplex stainless steels in wire drawn in different conditions. The results obtained show the important influence of work hardening due to drawing of the wire, so tmore»

$15.00 - Tech. Paper #P05176 (List Price) $0.00 - Tech. Paper #P05176 (Member Price)

No reviews
Surface evaluation of copper wire

Surface evaluation of copper wire

The surface quality of drawn wire can be important. This is especially true for magnet wire, where irregular wire surface could cause the enamel to rupture in service. Evaluation of a wire surface more»

$15.00 - Tech. Paper #P04000 (List Price) $0.00 - Tech. Paper #P04000 (Member Price)

No reviews
Surface modification of brass coated steel cord by electro plasma technology

Surface modification of brass coated steel cord by electro plasma technology

Electro Plasma Technology (EPT) was used to process brass-coated steel cord. Two types of tests were carried out: 1) creation of surface roughness in brass by use of different electrolytes and 2) appmore»

$15.00 - Tech. Paper #P05074 (List Price) $0.00 - Tech. Paper #P05074 (Member Price)

No reviews
Surface treatment of wire insulation by corona discharge

Surface treatment of wire insulation by corona discharge

This paper discusses the methodology and systems requirements for pre-treatment of insulated wire and cable using corona discharge, as well as applications considerations and system sizing based on tmore»

$15.00 - Tech. Paper #P05407 (List Price) $0.00 - Tech. Paper #P05407 (Member Price)

No reviews
Swaging

Swaging

In the forming process, wire is occasionally swaged. Depending on the percentage reduction from round to its flattened condition, the necessary force changes dramatically. The equipment required and more»

$15.00 - Tech. Paper #P04268 (List Price) $0.00 - Tech. Paper #P04268 (Member Price)

No reviews
Synchronized high speed machine wraps up insulation taping problem

Synchronized high speed machine wraps up insulation taping problem

An automated wire taping machine developed by City Machine Tool and Die is described. The sequence of operations, the machine components, and successful use of the machine at speeds up to 100 fpm aremore»

$15.00 - Tech. Paper #P02503 (List Price) $0.00 - Tech. Paper #P02503 (Member Price)

No reviews
Synthetic lubricants for copper wiredrawing

Synthetic lubricants for copper wiredrawing

Completely water-soluble coolant lubricant systems, with advantages for the end-user, have been made available. These synthetic wiredrawing lubricants can provide significant advantages when comparedmore»

$15.00 - Tech. Paper #P04965 (List Price) $0.00 - Tech. Paper #P04965 (Member Price)

No reviews
System design for quality control in MV/HV electrical cable manufacturing

System design for quality control in MV/HV electrical cable manufacturing

This paper records the development of a system for medium- and high-voltage electrical cable plants that automates cable quality measurement and tracking and gives rapid feedback for enhanced processmore»

$15.00 - Tech. Paper #P05023 (List Price) $0.00 - Tech. Paper #P05023 (Member Price)

No reviews
System for the processing of rolls and cold forming for closed profiles

System for the processing of rolls and cold forming for closed profiles

With the use of computer systems like (CAD/CAM/CAE) for designing, manufacturing and engineering purposes, companies have a useful effective system to produce and analyze designs, and design improvemmore»

$15.00 - Tech. Paper #P04904 (List Price) $0.00 - Tech. Paper #P04904 (Member Price)

No reviews
Taping solutions

Taping solutions

Concentric, eccentric and longitudinal taping applications have long been an integral part of the wire and cable manufacturing capabilities. This paper details the different systems that are used; thmore»

$15.00 - Tech. Paper #P04906 (List Price) $0.00 - Tech. Paper #P04906 (Member Price)

No reviews
Technical advances in the new SCR copper rod mill.

Technical advances in the new SCR copper rod mill.

Presented is the new Southwire Co. SCR-6580 copper system, which produces up to 60 short tons of copper per hour, and incorporates 'state-of-the-art' developments in the continuous casting and rollinmore»

$15.00 - Tech. Paper #P03570 (List Price) $0.00 - Tech. Paper #P03570 (Member Price)

No reviews
Technical and technological solutions adopted by Sampsistemi to reduce energy consumption along wire and cable production lines

Technical and technological solutions adopted by Sampsistemi to reduce energy consumption along wire and cable production lines

This paper presents several technical and technological solutions adopted by Sampsistemi to reduce energy consumption along wire and cable production lines. It examines the cost breakdown of flexiblemore»

$15.00 - Tech. Paper #P05255 (List Price) $0.00 - Tech. Paper #P05255 (Member Price)

No reviews
Technique for oxygen-free copper wire rod using the SCR process

Technique for oxygen-free copper wire rod using the SCR process

Mitsubishi Materials has developed a new method for lowering the oxygen content of the copper melt. Using a conventional shaft furnace and by controlling the combustion gases, the oxygen content of Smore»

$15.00 - Tech. Paper #P04964 (List Price) $0.00 - Tech. Paper #P04964 (Member Price)

No reviews
Technology production and properties of high-strength and high-conductivity nanostructured copper-silver wires for new type overhead line conductors

Technology production and properties of high-strength and high-conductivity nanostructured copper-silver wires for new type overhead line conductors

This paper presents research results of manufacturing composite filamentary nanostructure Cu-Ag alloys with 6% wt. silver addition. A suitable quantity and process sequence of high deformation plastimore»

$15.00 - Tech. Paper #P05514 (List Price) $0.00 - Tech. Paper #P05514 (Member Price)

No reviews
Temperature distribution over components with non-uniform current density

Temperature distribution over components with non-uniform current density

Broken strands in a flexible cord carrying an electrical current may cause substantial localized high temperature. Such a high temperature may cause serious failure such as flame ignition of cord insmore»

$15.00 - Tech. Paper #P05077 (List Price) $0.00 - Tech. Paper #P05077 (Member Price)

No reviews
Temperatures in the wiredrawing process—measurements and simulations

Temperatures in the wiredrawing process—measurements and simulations

Temperatures are important in the wiredrawing process, and measurements are very tricky. Simulations show very high temperatures in the contact between wire and die. For this study, thermocouples wermore»

$15.00 - Tech. Paper #P05501 (List Price) $0.00 - Tech. Paper #P05501 (Member Price)

No reviews
Tensile force requirement for the straightening of wire with roller straightening units

Tensile force requirement for the straightening of wire with roller straightening units

Straightening units are employed not only as autonomous tools in higher-level processes but also as elements in machines for a variety of purposes. Process design and the selective planning and constmore»

$15.00 - Tech. Paper #P04767 (List Price) $0.00 - Tech. Paper #P04767 (Member Price)

No reviews
Tensile strength control in high carbon rods

Tensile strength control in high carbon rods

Meeting finished wire tensile strength requirements with direct drawn wire from as-rolled rods requires the definition and control of starting rod tensile strengths. The relationship between startinmore»

$15.00 - Tech. Paper #P04328 (List Price) $0.00 - Tech. Paper #P04328 (Member Price)

No reviews
Tension sensors and controls in wire and cable processing

Tension sensors and controls in wire and cable processing

Product tension during wire and cable manufacturing is a critical process control parameter. This paper will explain the importance of tension control in drawing, stranding, bunching, extruding, windmore»

$15.00 - Tech. Paper #P04968 (List Price) $0.00 - Tech. Paper #P04968 (Member Price)

No reviews
Tension straightening of a drawn superfine wire

Tension straightening of a drawn superfine wire

With the recent advancements in the semiconductor and precision machines industry, the demand for straightness in superfine wire has been increasing year by year. This paper considers improving straimore»

$15.00 - Tech. Paper #P05209 (List Price) $0.00 - Tech. Paper #P05209 (Member Price)

No reviews
Test and evaluation of tempered bead wire in the cold drawing process

Test and evaluation of tempered bead wire in the cold drawing process

Nominal electrical resistivity of metal materials has been used as a sensitive signal to detect potential for breaking of bead wire in the cold-drawing process. As the size of non-metal inclusions wimore»

$15.00 - Tech. Paper #P05251 (List Price) $0.00 - Tech. Paper #P05251 (Member Price)

No reviews
The ‘cost of quality’ in wire and cable OEMs

The ‘cost of quality’ in wire and cable OEMs

This paper depicts the costs associated with changes that must be made in the field upon start-up, which the OEM must bear due to poor quality. The service person’s time and materials, altered enginemore»

$15.00 - Tech. Paper #P04854 (List Price) $0.00 - Tech. Paper #P04854 (Member Price)

No reviews
The “LEEDing” edge of sustainable R&D

The “LEEDing” edge of sustainable R&D

Scientific laboratories have high equipment densities, oversized air handling systems, augmented water consumptions, and a multitude of additional energy-intensive systems necessary for the functionimore»

$15.00 - Tech. Paper #P05463 (List Price) $0.00 - Tech. Paper #P05463 (Member Price)

No reviews
The advantages and importance of lubricant filtration

The advantages and importance of lubricant filtration

This paper discusses topics related to lubricant filtration, including the following: effects on lubricant life; machine maintenance; machine cleanliness and operator friendliness; the advantages of more»

$15.00 - Tech. Paper #P05252 (List Price) $0.00 - Tech. Paper #P05252 (Member Price)

No reviews
The advantages of Alumoweld® fasteners in pressure treated wood

The advantages of Alumoweld® fasteners in pressure treated wood

Electroplated galvanized nails are not recognized as being corrosion resistant in exterior applications due to the thin layer of zinc that is applied and the galvanic reaction that occurs between themore»

$15.00 - Tech. Paper #P05162 (List Price) $0.00 - Tech. Paper #P05162 (Member Price)

No reviews
The analysis of effective factors on attenuation phenomenon and introduction of a new method for proving an attenuation formula in copper telecommunication cables

The analysis of effective factors on attenuation phenomenon and introduction of a new method for proving an attenuation formula in copper telecommunication cables

In this paper the factors affecting attenuation in copper telecommunication cables will be analyzed, especially in high frequencies. The controlling methods of attenuation for controlling the crosstamore»

$15.00 - Tech. Paper #P05047 (List Price) $0.00 - Tech. Paper #P05047 (Member Price)

No reviews
The application of Laser Doppler Velocimetry for the non-contact speed/length measurement and sequential printing of wire and cable products to decrease costs and improve productivity

The application of Laser Doppler Velocimetry for the non-contact speed/length measurement and sequential printing of wire and cable products to decrease costs and improve productivity

This paper covers the Laser Doppler Velocimetry technology principle, the advantages of the technology as compared to mechanical/contact measurement methods, the benefits resulting from the technologmore»

$15.00 - Tech. Paper #P05268 (List Price) $0.00 - Tech. Paper #P05268 (Member Price)

No reviews
The application of Stelmor rod to high-carbon wire commodities

The application of Stelmor rod to high-carbon wire commodities

The open-coil cooling process for high carbon steel rod is discussed. Economic benefits of the process are: additional product, elimination of air patenting, partial elimination of lead patenting, remore»

$15.00 - Tech. Paper #P02854 (List Price) $0.00 - Tech. Paper #P02854 (Member Price)

No reviews
The benefits of using wiredrawing dies with smaller included angles and longer nibs

The benefits of using wiredrawing dies with smaller included angles and longer nibs

Increased productivity and improved wire quality are the significant results obtained when using dies with smaller included angles and longer nibs. This paper presents the results of the work conductmore»

$15.00 - Tech. Paper #P04682 (List Price) $0.00 - Tech. Paper #P04682 (Member Price)

No reviews
The calculation of the basic parameters for ``slip'' drawing machines

The calculation of the basic parameters for ``slip'' drawing machines

Mathematical calculations are given for estimating the ideal distribution of slip over the capstans of a multiple hole wiredrawing machine. Such a formula can be utilized to correctly establish and mmore»

$15.00 - Tech. Paper #P02978 (List Price) $0.00 - Tech. Paper #P02978 (Member Price)

No reviews
The characteristic properties of high carbon steel wire containing Mo with bainite structure

The characteristic properties of high carbon steel wire containing Mo with bainite structure

A high carbon steel drawn wire containing Mo with a bainite structure was developed for use in compression coil springs for automobile parts. Results showed that the wire had high tensile strength, hmore»

$15.00 - Tech. Paper #P04765 (List Price) $0.00 - Tech. Paper #P04765 (Member Price)

No reviews
The clamped joints - analysis of shapes and materials

The clamped joints - analysis of shapes and materials

The paper presents a survey of available joints of the clamped type (CJ), which are of crucial importance in view of the design safety level. A numerical analysis has been carried out to estimate themore»

$15.00 - Tech. Paper #P05342 (List Price) $0.00 - Tech. Paper #P05342 (Member Price)

No reviews
The cold rolling of steel wire

The cold rolling of steel wire

A new method for producing small gauge steel wire is described. The wire is mechanically cleaned and then cold-rolled using four stages of reduction on single draft machinery. Some of the mathematicamore»

$15.00 - Tech. Paper #P00137 (List Price) $0.00 - Tech. Paper #P00137 (Member Price)

No reviews
The comparison analysis of the mechanical properties of wires from TRIP steel with different carbon content

The comparison analysis of the mechanical properties of wires from TRIP steel with different carbon content

This paper shows a comparison analysis of mechanical properties of TRIP (Transformation Induced Plasticity) effect steel wires with different carbon content, classified into a group of AHSS (Advancedmore»

$15.00 - Tech. Paper #P05511 (List Price) $0.00 - Tech. Paper #P05511 (Member Price)

No reviews
The construction and use of patenting control charts.

The construction and use of patenting control charts.

The use of patenting control charts using dilatometric and hardness measurements to relate the transformational properties of steel to the endproduct tensile strength of lead-patented wire is reviewemore»

$15.00 - Tech. Paper #P03614 (List Price) $0.00 - Tech. Paper #P03614 (Member Price)

No reviews
The construction of a submarine interconnection between Sardinia and the Italian mainland (SA.PE.I.)

The construction of a submarine interconnection between Sardinia and the Italian mainland (SA.PE.I.)

$15.00 - Tech. Paper #P05258 (List Price) $0.00 - Tech. Paper #P05258 (Member Price)

No reviews
The continuous annealing process for aluminum and aluminum alloy wires

The continuous annealing process for aluminum and aluminum alloy wires

The annealing process of aluminum and aluminum alloys has traditionally been a challenge for wire processors. Many technical difficulties prevented inline annealing, forcing the producers to batch anmore»

$15.00 - Tech. Paper #P04737 (List Price) $0.00 - Tech. Paper #P04737 (Member Price)

No reviews
The continuous extrusion forming (Conform) of round aluminum conductor

The continuous extrusion forming (Conform) of round aluminum conductor

Research on the use of the Conform continuous extrusion forming process for production of aluminum conductor at Westinghouse Electric Corp is described. Equipment used, feedstock, tooling, operation more»

$15.00 - Tech. Paper #P03131 (List Price) $0.00 - Tech. Paper #P03131 (Member Price)

No reviews
The continuous heat treatment of wire using fluidized beds.

The continuous heat treatment of wire using fluidized beds.

Continuous heat treatment of wire using fluidized beds eliminates environmental pollution associated with molten lead or salt baths and results in energy savings. The principle of gas fired fluid bedmore»

$15.00 - Tech. Paper #P03170 (List Price) $0.00 - Tech. Paper #P03170 (Member Price)

No reviews
The corrosion of silver-plated copper wire

The corrosion of silver-plated copper wire

Corrosion of silver-plated copper wire was analyzed to determine the probable cause. Chemical analyses, metallurgical analyses, silver-copper cell measurements, and suggested corrosion mechanisms aremore»

$0.00 - Tech. Paper #P02276 (Member Price)

No reviews
The development of dual phase steels for the manufacture of high strength fasteners without heat treatment

The development of dual phase steels for the manufacture of high strength fasteners without heat treatment

Recently, Corus has developed a steel which can be used for 8.8-type strength applications without the requirement for final quenching and tempering, offering significant cost savings. Corus has achimore»

$15.00 - Tech. Paper #P05173 (List Price) $0.00 - Tech. Paper #P05173 (Member Price)

No reviews
The development of PCD/SCS die materials and their impact on wiredrawing practices

The development of PCD/SCS die materials and their impact on wiredrawing practices

Polycrystalline diamond (PCD) wire die blanks were introduced into the wire die industry by General Electric in 1974. Within the next five years Sumitomo Electric and DeBeers also began to produce PCmore»

$15.00 - Tech. Paper #P04979 (List Price) $0.00 - Tech. Paper #P04979 (Member Price)

No reviews
The development of pictorial standards for grading the degree of rusting on steel wire rods and wire products

The development of pictorial standards for grading the degree of rusting on steel wire rods and wire products

This paper presents the development of pictorial standards for classifying the degree of rusting on steel wire rods and wire products. It also discusses the application of visual standards as a tool more»

$15.00 - Tech. Paper #P04480 (List Price) $0.00 - Tech. Paper #P04480 (Member Price)

No reviews
The development of properties and structure of precipitation-hardened Al-Mg-Si alloy during continuous casting and rolling by the Continuus-Properzi method

The development of properties and structure of precipitation-hardened Al-Mg-Si alloy during continuous casting and rolling by the Continuus-Properzi method

Nowadays, commonly used feedstock to produce self-supporting overhead conductors is precipitation-hardened Al-Mg-Si alloy wire rod, obtained in a continuous casting and rolling line, e.g. Continuus-Pmore»

$15.00 - Tech. Paper #P05456 (List Price) $0.00 - Tech. Paper #P05456 (Member Price)

No reviews
The development of wire rope, Part III

The development of wire rope, Part III

Factors important in the development of wire rope, and pointcontact versus line contact between the wires of a strand arediscussed. Techniques for preforming wire ropes are described. Theimpact of wimore»

$15.00 - Tech. Paper #P00294 (List Price) $0.00 - Tech. Paper #P0294 (Member Price)

No reviews
The double-cascade-quench (DCQ) method of patenting high-carbon steel rod

The double-cascade-quench (DCQ) method of patenting high-carbon steel rod

A brief description and history of patenting is presented, followed by a description of the newly developed Double-Cascade-Quench (DCQ) method of patenting high carbon steel rod. The method includes more»

$15.00 - Tech. Paper #P02784 (List Price) $0.00 - Tech. Paper #P02784 (Member Price)

No reviews
The drawability of low carbon steel wire

The drawability of low carbon steel wire

Experiments were conducted to determine how the ductility of low carbon wire rod is affected by elements which are not intentionally added to steel. An eight die wire drawing machine was stopped, anmore»

$15.00 - Tech. Paper #P04207 (List Price) $0.00 - Tech. Paper #P04207 (Member Price)

No reviews
The effect of annealed vs. non-annealed boron treated steel on cold headers

The effect of annealed vs. non-annealed boron treated steel on cold headers

The object of this paper is to compare the actual cold-forming properties- and the effect of the material on the cold former -of boron grade 10B21 steel in a total of four conditions: two conditions more»

$15.00 - Tech. Paper #P03435 (List Price) $0.00 - Tech. Paper #P03435 (Member Price)

No reviews
The effect of boron on the properties of electric arc sourced plain carbon wiredrawing qualities

The effect of boron on the properties of electric arc sourced plain carbon wiredrawing qualities

Electric arc sourced wire rod is being used increasingly in areas in which basic oxygen (BOS) steels have been the traditional feedstock. In order to overcome the presence of higher residual and nitrmore»

$15.00 - Tech. Paper #P04484 (List Price) $0.00 - Tech. Paper #P04484 (Member Price)

No reviews
The effect of cast structure on the production of EC redraw rod for magnet wire

The effect of cast structure on the production of EC redraw rod for magnet wire

The grain structure of continuously cast EC aluminum has a great impact on the warm fabrication of 9.5-12mm redraw rod in a Properzi rolling mill. Adequate grain refinement of the structure improvesmore»

$15.00 - Tech. Paper #P04206 (List Price) $0.00 - Tech. Paper #P04206 (Member Price)

No reviews
The effect of drawing temperature on the properties and annealing response of copper wire

The effect of drawing temperature on the properties and annealing response of copper wire

Heat is generated in the “cold” drawing of copper wire, and drawing temperatures in the 200-300<sup>°</sup>C range are plausible. Experimental isothermal drawing passes in the 20-250<sup>°</sup>C ranmore»

$15.00 - Tech. Paper #P04844 (List Price) $0.00 - Tech. Paper #P04844 (Member Price)

No reviews
The effect of eccentricity phenomena on mutual capacitance in copper telecommunication cables

The effect of eccentricity phenomena on mutual capacitance in copper telecommunication cables

Eccentricity phenomena pose a significant problem in the design of copper telecommunication cables. These phenomena have no effect on some electrical characteristics, but do on others, such as mutualmore»

$15.00 - Tech. Paper #P04997 (List Price) $0.00 - Tech. Paper #P04997 (Member Price)

No reviews
The effect of flaw removal on billets and wires in rolling and drawing

The effect of flaw removal on billets and wires in rolling and drawing

In this paper, billet and wire that have traces formed during flaw removal were subjected to rolling and drawing to investigate the behavior of deformation and the recovery of the flaw-removal tracesmore»

$15.00 - Tech. Paper #P05234 (List Price) $0.00 - Tech. Paper #P05234 (Member Price)

No reviews
The effect of patenting variables on the structures and properties of patented rod - Part 3

The effect of patenting variables on the structures and properties of patented rod - Part 3

The conclusion of a three part series on the effect of lead patenting variables on steel rod structure and properties covers the austenitizing parameters for optimum microstructure. Descriptions of 5more»

$15.00 - Tech. Paper #P02442 (List Price) $0.00 - Tech. Paper #P02442 (Member Price)

No reviews
Results 901 to 1000 of 1158.
Search Technical Papers (Enter a keyword, technical paper name or description):